Each kit provides all the reliable antennas, current probes and accessories needed to satisfy a wide array of customer requirements.
Biconical Antennas 20 MHz - 18 GHz
Biconical Antennas operate efficiently over the frequency range of 20 MHz to 18 GHz. Suitable for FCC, MIL-STD, VDE, TEMPEST, and immunity testing.
Bilogical Antennas 20 MHz - 7 GHz
For rapid deployment along with the mobility of small package, these Bilogical Antenna Kits provides an inexpensive solution to broadband applications.
Current Probes 20 Hz - 500 MHz
Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on broadband current probes.
Dipole Antennas 25 MHz - 3 GHz
These half wavelength resonant dipole antennas are the foundation of every compliance testing lab and the ideal solution for site attenuation measurements.
H-Field Rod Antennas 100 Hz - 30 MHz
For those situations when improved sensitivity is desired in magnetic field testing, the H-Field Rod is an effective alternative to traditional loop antennas.
Horn Antennas 170 MHz - 40 GHz
These Horn antennas are an excellent choice for both radiated immunity and emissions testing for the higher frequencies.
Log Periodic Antennas 80 MHz - 7 GHz
Each antenna is lightweight, compact, rugged and has been manufactured to ensure maximum gain, low VSWR and high power handling capabilities.
Loop Antennas 20 Hz - 30 MHz
Whether used in a set to measure shielding effectiveness per MIL-STD 285 and NSA 65-6 or individually to satisfy specific requirements, the Loop Antenna is an efficient, low cost solution.
Monopole Antennas 100 Hz - 60 MHz
The Active Monopole Antenna can drive any receiver with 50 ohm input impedance and will perform FCC, MIL-STD and TEMPEST tests.
Preamplifiers5 KHz - 40 GHz
A.H. Systems' Preamplifier line is an excellent choice with a rugged design, no hassles with soldering your own power leads and they improve overall system sensitivity by at least 20 dB.
RF Cablesup to 40 GHz
Our Low-Loss High-Frequency flexible cables are the preferred choice over standard cable types.
Tripods and Mounting Adapters
The Active Monopole Antenna can drive any receiver with 50 ohm input impedance and will perform FCC, MIL-STD and TEMPEST tests.