Data Acquisition & Data Loggers
DAQ and Data Logger solutions from Measurement Computing and Data Translation provide for a wide range of applications and interfaces.
USB Data Acquisitions
Single Gain Multifunction USB DAQ Devices
USB-201 & USB-202: 100 kS/s sample rate
USB-205: 500 kS/s sample rate
USB-202 & USB-205: Two analog outputs
Eight SE analog inputs
12-bit resolution
+/-10 V input range
Eight digital I/O
High-Speed Multifunction USB DAQ Devices
16 SE/8 DIFF analog inputs
16-bit resolution
500 kS/s sample rate
±10 V, ±5 V, ±2 V, ±1 V input ranges
Eight digital I/O
Two counter inputs
One timer output
High-Speed Multifunction USB DAQ Devices
16 thermocouple inputs
24-bit A/D converter
Up to 75 S/s/ch sample rate
Thermocouple types J, K, R, S, T, N, E, and B supported
Log data to internal storage or mapped network storage
Internal 3GB memory - optional SD card, and USB slots
Internet Enabled Vibration-Acoustic Data Logger
Four simultaneous IEPE inputs
24-bit A/D converter
Up to 51 kS/s/ch sample rate
Real-time FFTs for continuous monitoring and analysis
Log data to internal storage or mapped network storage
Internal 3GB memory - optional SD card, and USB slots
High-Speed Multifunction USB DAQ Devices
16 SE/8 DIFF analog inputs
16-bit resolution
500 kS/s sample rate
±10 V, ±5 V, ±2 V, ±1 V input ranges
Eight digital I/O
Two counter inputs
One timer output
High-Speed Multifunction USB DAQ Devices
8 SE/4 DIFF analog inputs
16-bit resolution
USB-231: 50 kS/s sample rate
USB-234: 100 kS/s sample rate
±10 V input range
Two 16-bit analog outputs
Eight digital I/O
IEPE Measurement DAQ HAT
Two IEPE inputs
Two 24-bit, 51.2 kS/s A/D converters (one per channel)
AC coupled at ±5 V
10-32 and screw terminal connections for OEM support
Synchronous ADC conversions between multiple boards
Multifunction Ethernet DAQ Device
8 SE/4 DIFF analog inputs
16-bit resolution
250 kS/s sample rate
±10 V, ±5 V, ±2 V, ±1 V input ranges
Two 16-bit analog outputs
Eight digital I/O
One counter input
High-Speed, High-Precision, Simultaneous USB DAQ Device
8 SE/8 DIFF simultaneous analog inputs
18-bit resolution
200 kS/s/ch sample rate
±10 V, ±5 V, 0-10 V, 0-5 V input ranges
Two 16-bit analog outputs
Four digital I/O
Two counter inputs
Two quadrature encoder inputs
Thermocouple Measurement Ethernet DAQ Device
Eight thermocouple inputs
24-bit resolution
4 S/s/ch sample rate
Supports thermocouple types J, K, R, S, T, N, E, and B
Built-in CJC
Open thermocouple detection
Eight digital I/O
High-Speed, High-Channel USB DAQ Devices
USB-2627: 16 SE analog inputs
USB-2637: 64 SE analog inputs
16-bit resolution
1 MS/s sample rate
±10 V input range
Four 16-bit analog outputs
24 digital I/O
Four counter inputs, Four timer outputs
24-Channel Digital I/O Ethernet Device
24 digital I/O lines
±24 mA drive capability
Digital output alarm
One 32-bit event counter (shared with a DIO pin)
Remote network configuration
DIN-rail compatible
External power supply included
Simultaneous USB DAQ Device
8 SE simultaneous analog inputs
16-bit resolution
100 kS/s/ch sample rate (400 kS/s aggregate)
±10 V, ±5 V, ±2 V, ±1 V input ranges
Eight digital I/O
One counter input
No external power required
High Precision Thermocouple & Voltage Measurement USB DAQ Device
16 single-ended (SE) or eight differential (DIFF) analog input channels
24-bit resolution
1 kS/s sample rate
Two 16-bit analog output channels
Eight digital I/O channels
Two counter channels (32-bit) that count TTL pulses
Expandable Thermocouple and Voltage Measurement USB DAQ Device
USB-2416-4AO: 32 SE/ 16 DIFF analog inputs
USB-2416-4AO and AI-EXP32: 64 SE/ 32 DIFF analog inputs
24-bit resolution
1 kS/s sample rate
Supports thermocouple types J, K, R, S, T, N, E, and B
Four 16-bit analog outputs
Universal Input USB DAQ Device
4 simultaneous analog inputs
24-bit resolution
100 S/s/ch sample rate
Universal inputs measure voltage, current, thermocouples, RTDs, resistance, and bridge-based sensors
250 Vrms channel to channel isolation
±60 V, ±15 V, ±10 V, ±4 V, ±1 V, ±125 mV input ranges
Single-Channel Thermocouple Measurement DAQ Device
One thermocouple input
20-bit resolution
4 S/s sample rate
Integrated cold junction compensation (CJC) sensor
Open-thermocouple detection (OTD) feature
Supports J, K, R, S, T, N, E, and B type thermocouples
Accepts standard mini-plug
High-Precision Thermocouple Measurement USB/Ethernet System
TC-32: 32 thermocouple inputs and 40 digital I/O
TC-32 and TC-32-EXP: 64 thermocouple inputs and 80 digital I/O
24-bit resolution
3 S/s/ch sample rate
Supports thermocouple types J, K, R, S, T, N, E, and B
40 digital I/O (80 digital I/O when using TC-32-EXP)
USB and Ethernet interfaces
USB-1208FS-Plus/LS/1408FS-Plus Series features at a glance:
Eight SE/four DIFF analog inputs
12-bit resolution (USB-1208FS-plus & USB-1208LS)
14-bit resolution (USB-1408FS-Plus)
Two analog outputs
16 digital I/O
One counter input
±10 V (Single-ended mode); ±20 V, ±10 V, ±5 V, ±4 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V (Differential mode)
USB-1604HS-2AO features at a glance:
Four SE simultaneous analog inputs
16-bit resolution
1.33 MS/s/ch sample rate
±10 V, ±2.5 V, ±500 mV input ranges
32 digital I/O
Two analog outputs
Four counter inputs, two timer outputs
Three quadrature encoder inputs
Voltage and Current Output USB Devices
4, 8, or 16 analog outputs
16-bit resolution
100 S/s update rate
USB-3102 & USB-3104: Voltage output ±10 V, 0 V to 10 V. Current output 0 mA to 20 mA typ.
USB-3114: Voltage output ±10 V, 0 V to 10 V
Eight digital I/O
One counter input
24-Channel Digital I/O USB Devices
The 37-pin connector provides 24 digital I/O, one counter, six ground, and two power connections
The digital I/O port is configured as two 8-bit and two 4-bit ports based on an 82C55 mode 0 emulation
The CTR signal is the input to the 32-bit external event counter
5.5 V max inout voltage
24 Channel Digital I/O USB Devices
24 channels
64 mA sink input/15 mA source output (USB-1024HLS)
2.5 mA sink input/2.5 mA source output (USB-1024LS)
One 32-bit counter input
No external power required
High-Speed Counter / Timer USB Devices
USB-CTR04: Four counter inputs
USB-CTR08: Eight counter inputs
48 MHz maximum input frequency
Software-selectable resolution up to 64-bits
Aggregate scan rate of 8 MB/s
Supports Totalize, Period, Pulse width, and Timing counter input modes
Four independent pulse-width modulation (PWM) timers
Quadrature Encoder USB Device
Eight counter inputs (quadrature/non-quadrature mode)
Simultaneous input and decoding of up to eight incremental quadrature encoders
High-speed pulse counter for general counting applications; multiple counting modes supported
Configurable as single-ended or differential
10 MHz, 16-, 32, 48-bit resolution, ± 12 V input range
32 Channel High-Speed Digital I/O USB Device
32 channels
Input scan rate up to 8 MS/s
Update rate up to 8 MS/s
Pattern detection and generation
Independent input and output scan clocks
24 mA source, 10 mA sink output current
External trigger and clock inputs
No external power required
96 Channel Digital I/O USB Device
96 channels
5.5 V input voltage, 64 mA sink and 24 mA source
One 32-bit event counter
USB interface
Externally powered with included 5 VDC power supply
24 Channel Solid-State Digital I/O USB device
Mounting rack for 24 solid state relay (SSR) modules (backplane is divided into two groups of eight modules and two groups of four modules)
Onboard switch to configure the module type (input or output) for each module group (you cannot mix input and output modules within a group)
Onboard switch to configure the control logic polarity (active high or low) for each module group
Electromechanical Relay USB Devices
USB-ERB08: Eight single-pole double-throw (SPDT) Form C electromechanical relays directly controlled by digital I/O lines.
USB-ERB24: 24 single-pole double-throw (SPDT) Form C electromechanical relays directly controlled by digital I/O lines.
USB-ERB08: Supports configurations as two banks of four.
USB-ERB24: Supports configurations as two banks of eight and two banks of four
MCC 118/128: Voltage Measurement DAQ HAT
MCC 118: 8 SE 12-bit voltage inputs
MCC 118: 100 kS/s max sample rate (320 kS/s aggregate for stacked boards)
MCC 118: +/-10 V input range
MCC 128: 8 SE/4 DIFF 16-bit voltage inputs
MCC 128: 100 kS/s max sample rate (320 kS/s aggregate for stacked boards)
MCC 128: Multiple input ranges (+/-10 V, +/-5 V, +/-2 V, +/-1 V)
MCC 134: Thermocouple Measurement DAQ HAT
Four isolated thermocouple inputs
24-bit A/D converter
1 second update interval, minimum
Thermocouple types J, K, R, S, T, N, E, and B supported
Cold junction compensation
Screw terminal connections
MCC 152: Voltage Output and DIO DAQ HAT
Two 12-bit simultaneous voltage outputs
5 mA output drive, sourcing
0.8 V/µs slew rate
Eight bidirectional digital bits
5V / 3.3V operation; CMOS input thresholds
Programmable input polarity
Screw terminal connections
MCC 172: IEPE Measurement DAQ HAT
Two IEPE inputs
Two 24-bit, 51.2 kS/s A/D converters (one per channel)
AC coupled at ±5 V
10-32 and screw terminal connections for OEM support
Synchronous ADC conversions between multiple boards
Onboard sample buffers allow high-speed acquisition
