EA-10000 Industrial Series
Powerful performance
- 6U Power with 60 kW including 21 models
- 4U Power with 30 kW including 29 models
- Large selection of 50 models for special applications
Powerful rack performance
- A 19“ rack with 42 U for a system with 300 kW
- One unit with up to 13 racks with 64 units of 60 kW each
- For high power applications up to 3.84 MW
Powerful efficiency
- Fewer units for a high-power system
- Less rack space required
- Less operating costs
The single units with new 6U/4U power:
- Programmable DC power supplies
EA-PU 10000 4U/6U - Programmable bidirectional DC power supplies
EA-PUB 10000 4U/6U - Regenerative electronic loads
EA-PUL 10000 4U/6U
The rack power with up to 300 kW:
- Operation of one 19“ rack with 42U for a system with 300 kW on only 0.6 m² floor space
- Operation of up to 13 racks with a maximum of 64 units of 60 kW each as one unit
- For high power applications up to 3.84 MW
- Parallel operation of 10000 Series units of all power ratings
- Configure high-performance systems with fewer devices
- Saving critical rack space
- More power in a small footprint
Device Types and Series
19 Inch slide-in housing
(Series PU, PUB, PUL 10000)
Technical Specifications
Power Unit: EA-PU 10000 6U / 4U
Power Unit Bidirectional: EA-PUB 10000 6U / 4U
Power Unit Load: EA-PUL 10000 6U / 4U
Optionally available:
- Grid monitor (ENS)
- Insulation monitor
- Copper busbar for DC output
- Stainless steel water cooling
- Function generator
- Optional Interfaces: CAN, CANopen, EtherCAT, RS232, Profibus, Profinet, Modbus, Ethernet
Features
- DC input / output with autoranging
- Digital (FPGA) controlled DC input / output U – I – P – R
- Latest SiC technology
- Emergency stop (machine standards EN60204-1)
- LED‘s in the front to indicate the status of the device
- AC mains input with extended range (380 V – 480 V, 3ph AC)
- Built-in interfaces: Ethernet, USB, Analog
- Master-Auxiliary-Bus and Share-Bus
To make a multi-device system behave like a single device - Energy recovery up to over 96 %.
Regenerative load operation with energy recovery into the grid - Autoranging
The principle of automatic switching - Function generator (optional) and more
Ramp function, arbitrary generator, LUT, integrated PV characteristic curve - Variety of devices for every requirement
21 models in 60 kW series and 29 models in 30 kW series
EA-10000 Industrial Series with 4U Power
29 models with 30 kW power
No content found